TDS Tester Pens | Hydroponic TDS Testers | TDS pen | Oakton TDS testers_Milwaukee TDS
|
MIAMI HYDRO HYdroponics-Grow-Light.com Hydroponics Supply
|
The function of a nutrient solution or fertilizer mixture is to supply the plant roots with water,
oxygen and essential mineral elements in soluble form. Each plant has its preferred nutrient
concentration to facilitate the absorption process to the roots. Wrong concentration may result
in wilting and suppresses plant growth. Trans Instruments HortiCare Nutrient concentration
check tester is specially designed with advanced features to ensure fast and accurate
concentration test, for the commercial as well as home growers. | PRECISE PPM
MEASUREMENT: Uses commercially acclaimed 700 measuring factor. | AUTO-LOCK
FUNCTION: Intelligent sensing of endpoint reading every time. | ATC FUNCTION: Readings are
automatically temperature compensated. | BEEP FUNCTION: Able to beep to signal the
beginning and end of each function. | EASY CALIBRATION: Single button calibration. | AUTO
SHUT OFF: Automatically shuts off to conserve battery when unit is idle. | LOW BATTERY
INDICATOR: Automatic alert to change battery when needed. | OPERATING RANGE: 0 to 1,990
ppm. | DISPLAY RESOLUTION: 10ppm. | ACCURACY: ±5% full scale. | CALIBRATION POINT:
990ppm (KCl). | BATTERY: 4 x 1.5V Button Cell (LR44 equiv.)
HortiCare Nutrient Check PPM
|
|
|
Tri-Meter Replacement Probe
|
|
|
The Nutradip® CMS (constant monitoring system) Nutrient Meter has automatic
temperature compensation and measures the TDS ppm/EC in your water.
- 2 year limited warranty on meter. 6 month limited warranty on the probe.
This meter gives you the ability to monitor pH level, Nutrient Levels in PPM and Nutrient
Temperature.
- 2 year limited warranty on meter. 6 months limited warranty on the probe.
PPM/pH/Temp Continuous Monitor
|
|
|
This meter gives you the ability to monitor pH level, Nutrient Levels in EC and Nutrient
Temperature.
This continuous monitoring system requires no batteries, just plug it in to an AC wall
receptacle and the meter will remain in a calibration mode for months. The Nutradip®
Tri-Meter, with automatic temperature compensation, is the best way of measuring the
strength of nutrients in your water, pH, and monitoring temperature at the same time. 2
year limited warranty on meter. 6 months limited warranty on the probe.
EC/pH/Temp Continuous Monitor
|
|
|
The Primo TDS tester provides a fast and dependable way to measure the Total
Dissolved Solids in your water samples. It is ideally suited for the rigorous demands of
water quality professionals, who will appreciate the practicality of Primo's easy-to-read
LCD when demonstrating the before and after results of conditioning and filtration
systems. Temperature is compensated automatically to ensure the readings are
consistent to the standard or reference temperature.
Operating and routine maintenance has never been easier. Primo TDS uses a single
button at the top of the meter. Press it once and the meter is powered and ready for use.
Press and hold the button for a few seconds and Primo automatically enters calibration
mode. Simply open a sachet of the calibration solution, dip the probe and within
seconds the meter recognizes the calibration solution and calibrates itself! Maximum
battery life is managed by Primo's power microprocessor, which automatically turns it of
after 5 minutes.
The HortiStick 3-in-1 brings the best of technology into one sleek meter. It combines the
measurement of the three most crucial parameters needed for a successful harvest: pH,
Conductivity, and Temperature. Package content: 1x Main Unit, 1x Hand Strap, 1x Replaceable
Probe, 1x Operations Manual, 4x AA Size Batteries. Simple and easy to use. Simultaneous
display of pH and nutrient concentration. Replaceable sensor for prolonged meter usage.
Auto endpoint sensing & display lock. Automatic temp. compensation. Rugged and water
resistant. Push button calibration with automatic shut-off. | pH Range: 0-14.0, ppm Range: 0-
1990, Temp range: 0-50°C | pH Resolution: 0.1pH, ppm Resolution: 10ppm, Temp.
Resolution: 0.1°C | pH Accuracy: ±0.2, ppm Accuracy: ± 5% F.S., Temp. Accuracy 0.5°C | 1
year warranty
HortiStick 3-in-1 Multimeter
|
|
|
FREE SHIPPING...FREE SHIPPING...FREE SHIPPING