Thermometer | DigitalThermometer | InfaredThermometer | WirelessThermometer | Indoor-Outdoor Hygrometer
|
MIAMI
HYDRO
HYdroponics-Grow-Light.com
Hydroponics Supply
|
\
Programmable outlet thermostat allows control any 120 volt device up to 15 amps. Use
with a fan or air conditioner for cooling purposes. Also may be used with a space heater
for heating purposes.
- Separate programs for heating and cooling.
- Setting Range 45°F to 90°F (7°C to 32°C) with F/C selectable
- Temporary temperature override and a manual hold.
- Adjustable temperature differential/cycle rate.
- Mode slide switch and a positive on/off switch.
- 120VAC outlet powered.
- 12 hour clock only. 2 G13A size 1.5V alkaline batteries included (for clock only). On-
screen low battery indicator.
- Battery free memory storage.
- 5 minute short cycle protection.
- Time and temperature alternate in display
Luxpro Programmable Digital Thermostat
|
|
|
- Measures indoor/outdoor temperature and indoor humidity.
- Stores the min/max values of the indoor/outdoor temperature and indoor humidity.
- Switch between °C and °F.
- Clock function.
- 12/24 hour mode switch.
- Water proof temperature probe.
- Uses 1 AAA battery (not included).
EcoPlus Large Display Therm./Hygrometer
|
|
|
- Large screen digital readout.
- Wireless sensor transmits up to 50 feet.
- Expandable to accept 2 additional sensors.
- Waterproof casing is chemical and UV resistant.
- Displays degrees in F or C.
- 2 AA batteries included.
- Wireless Sensor - For use with EcoPlus Digital Thermometer & Hygrometer #716555.
- Transmits up to 50 feet.
- 2 AAA batteries included
EcoPlus Digital Therm./Hygrometer
|
|
|
- Temperature control range is 55° F to 95° F.
- Controls cooling or heating equipment.
- Day and night settings keep temperature within 4° F of set point.
- 6 foot temperature probe is accurate to within 2° F.
- Plastic enclosure protects internal components from dust and moisture.
- 15 Amps/120 Volts/60 Hz.
- 3 year warranty
Titan Kronus 1- Temperature and Humidity Controller
|
|
|
This product controls temperature and humidity in your grow area at your preferred
settings. The Kronus 1® activates an exhaust fan, A/C or dehumidifier if the temperature
or humidity exceeds the preferred setting. Plug your exhaust fan or A/C into the ’Exhaust
Fan Output’ to control your temperature, and plug your dehumidifier into the ‘Dehumidify
Output’ to keep your humidity in check. This is a favorite controller for every gardener!
- Controls temperature and humidity in your garden.
- Easy to understand.
- Highlighted ‘Grow Zones’ for ease of use.
- 25 foot modular remote temperature and humidity sensor.
- Only the highest quality components are used.
- Improves your yield by creating the perfect environment for your plants.
- Controllers designed by our industry, for our industry.
- 15 Amps/120 Volts/60 Hz.
- 3 year warranty.
The Kronus 2® controls temperature, humidity and CO2 in your grow area at your
preferred settings. The built in ten minute ‘CO2 Delay’ deactivates the CO2 equipment if
settings are exceeded using a digitally based system. The software polls temperature
and humidity settings for ten minutes after the CO2 is defeated to verify that the
conditions are too high, then activates your equipment to lower the conditions below
your settings. If your conditions drop below the set point during the 10 minute ‘CO2
Delay’, then the ventilation process is defeated and the ‘CO2 ON’ outlet is reactivated,
saving your valuable CO2 and keeping it amongst the plants. The ‘CO2 ON’ feature is
only activated during daylight periods to dose CO2 when your plants are able to uptake
it, and is disabled during the nighttime hours or when the humidity or temperature
exceeds the preferred settings.
- Controls temperature, humidity and CO2 in your garden.
- Activates 'CO2 ON’ outlet only during daylight hours.
- Ten (10) minute ‘CO2 delay’ feature allows maximum CO2 coverage with minimum CO2
waste.
- Easy to understand and use with highlighted ‘Grow Zones’.
- 25 foot modular remote temperature and humidity sensor.
- 15 Amps/120 Volts/60 Hz.
- Improves your yield by creating the perfect environment for your plants.
- 3 year warranty
The Kronus 3® controls temperature (day & night) and CO2 in your grow area at your
preferred settings. The ‘CO2 ON’ feature is only activated during daylight periods to dose
CO2 when your plants are able to uptake it, and is disabled during the nighttime hours
or when the temperature exceeds your preferred settings. The built in ten (10) minute
‘CO2 delay’ feature deactivates CO2 equipment if the day temperature setting is
exceeded. The ‘Night Only’ output allows use of a nightlight or circulation fan. The ‘Night
Heat Output’ is used to plug a heater into to keep your plants from getting the night
chills. The Kronus 3™ is the ultimate in temperature controls!
- Controls day and night temperature and CO2 in your garden.
- Activates 'CO2 ON’ outlet only during daylight hours.
- Ten (10) minute ‘CO2 delay’ feature allows maximum CO2 coverage with minimum CO2
waste.
- Features a ‘Night Only’ and ‘Night Heat’ outputs to assist the gardener with the
maintenance of the garden after the lights have turned off.
- Easy to understand and use with highlighted ‘Grow Zones’.
- 25 foot modular remote temperature sensor.
- Improves your yield by creating the perfect environment for your plants.
- 15 Amps/120 Volts/60 Hz. 3 year warranty
The Kronus 4® controls temperature, humidity and CO2 in your grow area at your
preferred settings. The built in ten (10) minute ‘CO2 delay’ feature deactivates CO2
equipment if the temperature or humidity settings are exceeded. The ‘CO2 ON’ feature is
only activated during daylight periods to dose CO2 when your plants are able to uptake
it, and is disabled during the nighttime hours or when the humidity or temperature
exceeds the preferred settings. The ‘Night Only’ output allows use of a nightlight or
circulation fan. The Kronus 4™ gives the expert gardener the top shelf controller they’re
looking for to maintain their garden!
- Controls CO2, DAY/NIGHT temperature and humidity in your garden.
- Activates 'CO2 ON’ outlet only during daylight hours.
- Ten (10) minute ‘CO2 delay’ feature allows maximum CO2 coverage with minimum CO2
waste.
- Features a ‘Night Only’ output to assist the gardener with the maintenance of the garden
after the lights have turned off.
- Easy to understand and use highlighted ‘Grow Zones’.
- 25 foot modular remote temperature and humidity sensor.
- Improves your yield by creating the perfect environment for your plants.
- 15 Amps/120 Volts/60 Hz. 3 year warranty
- Remote sensor is specifically designed for the Kronus 1, 2 & 4 controllers.
- Provides a digitally based signal that reacts quickly to changing temperature and
humidity levels in your garden.
- Plastic enclosure resists dust and moisture.
- Integrated photocell allows the operator to monitor both day and night conditions.
- Green LED indicates that sensor is functioning properly.
- May be located up to 50 feet from the controller
Titan Controls Temp. & Humidity Sensor
|
|
|
Titan Kronus2- Temperature and Humidity Controller Plus Co2 Intergration
|
|
|
Titan Kronus3- Day/Night Temperature and Humidity Controller Plus Co2 Intergration
|
|
|
Titan Kronus4- Temperature and Humidity Controller with Night Outlet Plus Co2 Intergration
|
|
|
Titan Controls- Temperature and Humidity Sensor with PhotoCell
|
|
|
FREE SHIPPING...FREE SHIPPING...FREE SHIPPING
