PH Pens | PH Tester | Hydroponic PH Pen | Oakton PH Pens | Milwaukee PH pens | Oakton
|
MIAMI HYDRO HYdroponics-Grow-Light.com Hydroponics Supply
|
When HANNA® introduced its first version of the pHep (pH electronic paper) in 1986,
it immediately revolutionized the standard in pH measurement. pHep's ease-of-use
in combination with its affordability made it possible for non-technical and technical
personnel alike to measure pH on the spot, accurately and inexpensively throughout
a variety of industries. Since its introduction, over 1 million pHeps have gone to
satisfied customers around the world.
We at HANNA® have always valued the comments and suggestions coming from
our customers. For this series, we have included all of the features you have asked
for and more! The pHep 4 and pHep 5 include features such as a dual-level LCD,
battery level indicator, replaceable pH electrode cartridge, instability indicator,
automatic shut-off and automatic calibration all in a floating, waterproof casing.
Hanna PHEP 4 Tester With Replaceable Electrode
|
|
|
The HI 98107 (pHep®), which is the result of over two decades of research and manufacturing experience, is the updated version of our widely popular 96107 (pHep®). Today the redesigned pHep series feature a rugged and ergonomically enhanced casing that fits comfortably in your hand and a larger LCD which makes it easier to read at any angle. With the latest innovation of a non-clogging fiber junction the new pHep meters last much longer. Simply pull out 1-2 mm (1/8") of the junction fiber to completely renew the junction.
- The pHep® offers a Range of 0.0 to 14.0 pH and an Accuracy of ±0.1 pH. This tester
is calibrated manually to 2 points
|
Hanna PHEP Tester (Model HI 98107)
|
|
|
- Measures pH and Temperature.
- Auto-ranging three point calibration with digital fine tuning.
- Includes 4 pH buffer solution in a sponge embedded in a clear cap.
- Waterproof housing.
- Simultaneous temperature display.
- Measurement Range: 0-14 pH.
- Digital automatic calibration (one point), with digital fine tuning.
- Auto-off function, data-hold function and low-battery indicator.
- Display: large and easy-to-read LCD screen includes simultaneous temperature
reading.
- Factory Calibrated: The PH-200 meter is three-point factory calibrated to 4, 7, and 10
pH. The meter can be recalibrated with digital calibration using the push buttons,
rather than a screwdriver.
- Includes a cap, batteries, lanyard, and pH 7.0 buffer.
- One year warranty.
HM Digital Waterproof pH Meter Model PH-200
|
|
|
HI 981401N has been designed to meet the Grower's need for equipment suited to
the aggressive environments found in agricultural and hydroponics applications.
The housing is water-resistant and features a molded eye which allows installation
right above the sample to be monitored.
Measurements are highly accurate and can be verified with one or two point
calibrations. With a 12 Volt DC power supply included with the meter, low battery
failures are never an issue. The electrode is interchangeable and the connector is
well-protected behind a waterproof sheathing. The meter is supplied with a
stainless steel probe, preventing potential grounding problems and ensuring
extended electrode life.
The gel-filled pH electrode has been specially designed to address the needs of
growers. Its design guarantees greater clogging resistance in fertilizer solutions
with high concentrations of phosphate, nitrate, etc
Hanna Grochek Water Resistant pH Indicator
|
|
|
At the cost of just a few rolls of litmus paper, you can have the industry's best pocket-
size pH tester. The Checker supplies you with fast and accurate readings from 0.00
to 14.00 pH with a resolution of 0.01 pH. This compact tester features a large easy-
to-read LCD and a simple to perform 2-point calibration. The pH electrode of the
Checker can be replaced; simply unscrew the electrode from the meter body and
screw on a new one. The Checker is fast, accurate, lightweight and with 3000 hours
of battery life, you don't have to worry about frequent battery replacement. Testing pH
has never been easier!
Hanna Checker pH Tester (HI 98103)
|
|
|
The Nutradip® CMS (constant monitoring system) pH Meter is the reliable way to
measure the acidity or alkalinity in your water. It is a continuous monitoring pH meter
with automatic temperature compensation. 2 year limited warranty on meter. 6
month limited warranty on the probe
- Tests the acidity of soil
- Check which plants suit your soil
- Enables you to alter soil conditions
- Use for fruits, flowers, shrubs and vegetables
- No batteries required
Rapitest Mini pH Tester Model 1815
|
|
|
FREE SHIPPING...FREE SHIPPING...FREE SHIPPING