FanTech Inline Mixed Flow Fans | Ecoplus Axial Fans | Dayton Axial Fans
|
MIAMI HYDRO HYdroponics-Grow-Light.com Hydroponics Supply
|
These fans are specifically designed to bridge the transition between centrifugal and
axial by combining the high flow of axial designs with the higher pressure, non-
overloading characteristics of backward curved impellers. Galvanized steel housing as
above with baked powder coat finish. External motor with built-in thermal overload
protection and automatic reset. Permanently sealed ball bearings. External wiring box
for ease of connection. 100% speed controllable. Mixed flow impeller. Suitable for air
stream temperatures up to 140° F. Excellent heat dissipation to ensure long motor life.
Tested and approved by UL and CSA. 3 Year Factory Warranty. Power cord and strain
relief included, but not wired in
Fantech Inline Mixed Flow Duct Fan FKD Series
|
|
|
German made, top quality motor. Same fans as FX series but offer a galvanized silver
housing instead of the blue color of the FX fans. Powered by external rotor motorized
impeller for excellent heat dissipation. Automatic reset thermal overload protection.
Permanently sealed ball bearings. External wiring box for ease of connection. FG Series
fans are suitable for airstream temperatures up to 140° F. 100% speed controllable. 5
Year Factory Warranty. Power cord and strain relief included, but not wired in.
Fantech Inline Centrifugal Fans FG Series
|
|
|
These excellent quality axial fans can be used in any application where ventilation/ air
movement is required. They are very reliable and will provide years of trouble-free use.
Includes detachable power cord. Power cord included. 1 year warranty
4” SQUARE AXIAL FAN:
Voltage Rating 115 Volts, 2900 RPM, Bearing Sleeve, Speech Interference Level 48 dB,
Max. Temp. 158˚ F. Detachable power cord and cast aluminum housing.
6” ROUND AXIAL FAN:
oltage Rating 115 Volts, 3200 RPM, Bearing Ball, Speech Interference Level 55 dB, Max.
Temp. 176˚ F. Detachable power cord and cast aluminum housing.
10” ROUND AXIAL FAN:
Voltage Rating 115 Volts, 1600 RPM, Bearing Ball, Speech Interference Level 52 dB,
Max. Temp. 176˚ F. Detachable power cord and cast aluminum housing
Easy to use - plug fan into control receptacle, then plug control into 120 volt power
supply. Set thermostat to a temperature you want the fan to come on at and that’s it!
Rotary type variable speed controller with on/off switch. Brushed aluminum switch plate
and screws included. Fits standard single gang box. 5 Amp
- Automatically increases or decreases fan speed based on controller set points.
- Allows user to adjust deadband range to meet garden requirements.
- Temperature control range is 55° F to 95° F.
- 6 foot temperature probe is accurate to within 2 °F.
- Plastic enclosure protects internal components from dust and moisture.
- 6 Amps/120 Volts/60 Hz.
- 3 year warranty
Fan Speed Control: Titan Controls Mercury 3
|
|
|
FREE SHIPPING...FREE SHIPPING...FREE SHIPPING