HYDRO Hydroponics-Grow-Light.com Hydroponics Supply
|
Humidity Monitor | HumidityController | GreenAir Humidity Controller | Humiditfier Controller
This CT-DH-1 is designed to turn “On” and “Off” exhaust fans and/or intake fans to
remove unwanted atmosphere due to heat or humidity. This device is intended as a
cooling and dehumidifying control. This controller is ideal for situations where excess
heat and humidity need to be exhausted. Internal sensors will allow a 7° temperature
comfort zone and a 7% humidity span (differential) between the time the fans go “Off”
and come back “On” again. When either temperature or humidity exceeds the dial
settings, all four outlets will turn “ON”, activating any cooling or exhaust equipment
plugged into the controller
Green Air Products Model CT-DH-1
|
|
|
While the CT-DH-3 has many applications, it was primarily developed to be used with
CO2 equipment and exhaust type fans. Internal sensors will allow a 7° temperature
comfort zone and a 7% humidity (differential) between the time the fans go “Off“ and
come back “On” again. Temperature or humidity rise will activate the right hand (Exhaust
Outlets) outlets and deactivate the left hand outlets (CO2 Outlets). Plug the controller into
a power surge protector to protect your valuable equipment, and then plug the surge
protector into a 110 wall outlet. Set the temperature and humidity to the desired settings
Green Air Products Model CT-DH-3
|
|
|
The iGS-220 CO2 relative humidity and temperature controller is the simplest and most
complete solution to integrated climate management and CO2 enrichment or venting.
The resulting climate can increase yields and quality of harvest while insuring CO2 and
energy savings. The electronic module displays the actual values of the CO2, relative
humidity and temperature sensors. The controller includes an internal fan to speed up
the air sampling process thus yielding better climate control. The control unit can be
positioned up to 6 feet away from the output box (a cable up to 50 feet can be used). The
control unit logs the last 24 hours minimum, maximum and average CO2 concentration,
relative humidity and temperature values. Multiple operation modes are available and
the differential of operation is adjustable
Nova Day & Night Controller - Model iGS-220
|
|
|
Green Air Product Cooling Thermastate and Dehumidistat
|
|
|
Green Air Product Synchronized Cooling Thermastat and Dehumidistat
|
|
|
NOVA Day/Night Co2, Relative Humidity, and Temperature Smart Control
|
|
|
FREE SHIPPING...FREE SHIPPING...FREE SHIPPING
|