Co2 Regulators| Green Air Bottled Co2 Regulators & Solenoid | Sentinel Co2 Regulators| Titan Controls Co2 Regulator
|
MIAMI HYDRO Hydroponics-Grow-Light.com Hydroponics Supply
|
forged brass flow gage regulator with a UL/CE/CSA certified
emitter solenoid valve. These systems offer a flow range from 7-
20 SCFH. The BCDE systems come with 10 feet of clear tubing
with spring clamps, a grounded 6ft 120 volt power cord.
Green Air Products Model BCDE-1
|
|
The Sentinel CO2-REG controls the flow of CO2 and regulates the
amount of CO2 with a precision flow gauge that can be set from
1/2 – 15 SCFH (standard cubic feet per hour). The color coded
pressure gauge is easy to read and understand. Comes with a 6
foot power cord and 120 volt solenoid pre-wired. Ready to
connect to a controller or a timer. Can be used with either 20 lb or
50 lb CO2 cylinders. The CO2-REG reduces the pressure from
the cylinder from over 2000 psi down to 30 psi. Maximum inlet
3000 psi.
Sentinel CO2-Reg - CO2 Regulator
|
|
Designed to be used with the CO2-REG. Using the CO2-EXP
together with the CO2-REG allows 2 tanks to be connected and
controlled. Extend time between required tank charges. The
connection to the CO2-EXP is low pressure making installation
safe and easy. The CO2-EXP comes with its own easy to read
gauge and 1/4” interconnecting hose.
Sentinel CO2-EXP Expansion Regulator
|
|
controllers and timers.
- Precision accuracy flow meter - .5 to 15 SCF/hour.
- CO2 helps increase overall plant growth.
- Features heavy-duty solenoid valve.
- Two plastic tank washers included.
- Brass construction for long-lasting dependability and durability.
- Includes 12’ of CO2 dispensing line.
- Powered by 6’ - 120 volt grounded power cord.
- High quality oil-less pressure gauge.
- 3 Year Warranty.
Titan Controls CO2 Regulator
|
|
The Titan Controls® C02 heater was designed to prevent C02
regulator freeze-up and avoid cracking the internal diaphragm of
the regulator due to high flow conditions. The C02 Heater is
installed between the C02 cylinder valve and the regulator, and
warms the gas stream allowing for increased flow rates without
regulator freeze-up. The C02 Heater may be used in conjunction
with a Titan Controls C02 Greenhouse Regulator or any other
C02 regulator system.
- Manufactured in USA with aluminum case and solid brass
expansion chamber.
- Solid brass fittings for C02 cylinders, CGA 320.
- Completely enclosed heating element.
- 15 Volts/50-60 Hz/Single Phase/100watt.
- Capacity = 90 scfh max and NEMA 5-15 grounded power cord.
- Shown with optional tank and CO2 Regulator.
Titan Controls CO2 Inline Heater
|
|
FREE SHIPPING...FREE SHIPPING...FREE SHIPPING