| Co2 Generators | GreenAir Co2 Generators | Titan Controls Co2 Generators | Hydrogen Pro Water Cooled Co2 Generators |
| Miami Hydro Hydroponics-Grow-Light.com Hydroponics Supply |
| QUICK FIND |
The Selene 1™ is for use in small to medium sized (under 300 sq ft) grow
spaces. The unit comes with 4 burners installed and includes brass plugs to
decrease CO2 production, if required. The Selene 1™ comes with: 12 foot LP
rated hose with POL fitting, 120 Volt A/C power adapter, #4 ceiling hook, steel
chain to hang the Selene, hex wrench and spare burner plugs. Natural Gas (NG)
conversion kits available. Installation should only be completed by a licensed
professional.
- Four (4) burners – Adjustable from 5,588 BTU’s to 11,176 BTU’s.
- Electronic Spark Ignition (ESI)– No pilot light necessary.
- Safety “tip-over” switch shuts down LP gas to Selene 1 in case the CO2 generator
falls or gets knocked over. - 2 Amps/120 Volts/60 Hz./3 year warranty.
|
| |||||||
The Selene 2™ is for use in larger (over 300 sq. ft.) grow spaces. The unit
comes with 8 burners installed and includes brass plugs to decrease CO2
production, if required. The Selene 2™ comes with: 12 foot LP rated hose with
POL fitting, 120 Volt A/C power adapter, #4 ceiling hook, steel chain to hang the
Selene, hex wrench and spare burner plugs. Natural Gas (NG) conversion kits
available. Installation should only be completed by a licensed professional.
- Eight (8) burners – Adjustable from 11,176 BTU’s to 22,352 BTU’s.
- Electronic Spark Ignition (ESI) – No pilot light necessary.
- Safety “tip-over” switch shuts down LP gas to Selene 2 in case the CO2 generator
falls or gets knocked over. - 2 Amps/120 Volts/60 Hz./3 year warranty.
|
| ||||||||||
Each kit contains 4 high quality brass burners, hex wrench to remove any
filler plugs and a small sachet of pipe dope to properly seal burners in
generator. Installation should only be completed by a licensed
professional.
|
|
Replacement parts for your Titan Controls® Selene CO2 generators. Installation
should only be completed by a licensed professional.
|
| |||||||
The HydroGEN PRO is the world’s first and only water cooled CO2 generator.
Water cooling can remove 86% of the heat produced by burning propane and has
many features not available in any other CO2 generator on the market. The unit
can easily be used in a closed-loop system with a small chiller and reservoir, or you
can connect directly to your home water supply and drain to storage for reuse in
your garden. Compact for easy placement. This optional valve (used in place of a
pump) is designed to be installed in a pressurized water line and to be controlled
by your CO2 monitor. This is a high quality solid brass valve designed for years of
service. The valve has 1/2” NPT outlets that can be used with your existing
plumbing or you can install on ½” hose barbs to make the connection. You will
need either a pump or a valve but not both. 1 Year Warranty.
|
|
The MiniGEN is a propane fueled CO2 generator that comes with a removable
heat exchanger that allows you to use the MiniGEN with or without water cooling.
Designed for use in small gardens (10' x 10' or less), the unit measures only 6" x 7"
x 10" and can be easily installed by wall mounting or by chain hanging. The 1,250
BTU/hr burner is operated by an electronic ignition with no standing pilot light.
The unit has an anti-tip sensor and uses 12 volts to operate the ignition. The
MiniGEN can be used with any CO2 monitor on the market, but when paired
with the Hydro Innovations brand CO2 monitor, the result is a very safe, very
cool, and very affordable alternative to CO2 bottles.
|
| |||||||
This accessory for the HydroGEN and HydroGEN PRO uses a heat
exchanger and a fan to cool the last little bit of heat left over in the CO2 produced
by the generators. Adding the Ice Cap can take the water cooling efficiency from
86% to 98%!
|
|
This high quality fan speed controller was custom made for Hydro Innovations by
Grow Zone. Designed to regulate the air conditioning through the Ice Box, our
thermostat controls power to the fans with separate settings for lights on and lights
off temperatures. During the on light cycle, fans are sped up to full power when
cooling is needed and are slowed to an idle when the cooling needs are met.
During the off light cycle the fans will again speed up when cooling is needed, but
they will completely turn off when the cooling needs are met. With 7.5 amps
available several fans can be run by one controller.
|
| |||||||
FREE SHIPPING...FREE SHIPPING...FREE SHIPPING
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |